Realtek Pcie Gbe Family Controller Cannot Connect to Internet
Sometimes you may find that there is no network or that the Realtek PCIe GBE family controller keeps disconnecting under Windows 10. If you look in Device Manager, you will just find a yellowish exclamation mark after the network adapter tree extension. Sometimes the Device Manager reports that the network adapter has fault code 31 or error code 12.
For some users, driver or hardware problems with the Realtek PCIe GBE controller family are also common. In whatsoever case, you should immediately solve this problem with the Realtek network driver on Windows 10.
What is a Realtek PCIe GBE controller family?
Information technology is a Realtek controller chipset that connects your computer's mainframe PCI Limited (PCIe) charabanc to GBE (Giga Band Ethernet). In add-on, it too allows you to connect your computer to a wired Internet network and so that your computer works with the Internet.
Simply put, the Realtek PCIe GBE Family Controller driver works for the LAN hardware integrated into your PC's motherboard.
Why your Realtek PCIe GBE Family Controller does not work on Windows 10.
Various factors can prevent the Realtek controller from working properly. One of these reasons could be a simple error of enabling Wi-Fi connexion and wired connection at the same time. To disable Wi-Fi, simply hover your mouse over the buttons in the bottom right corner of the toolbar, click on the Wi-Fi icon and disable the Wi-Fi connection you lot're currently connected to. Information technology's that uncomplicated!
Sometimes the reason is a little more serious. To get a PCIe GBE family controller from Realtek, you had to download the driver from the Realtek website. You need to brand sure that yous are downloading from the correct site.
Yous volition most probable get a defective product or non get one at all if you download something from a site that is not affiliated with the motherboard company of the product you are looking for.
The more than you use questionable-looking sites or sites without a valid domain proper noun, the more than probable you are to get some kind of virus or malware in exchange for a download. You tin trade the product yous want for malicious material that can infect and compromise your computer.
To repair the Realtek Family controller
Using a system restore betoken
Having a system restore betoken at a time when yous know everything is working fine is a good thing, as it can save you a lot of problem in such a situation. If you have ane, follow these steps to get back to that point.
- While holding down the Windows cardinal, press R. Blazon rstrui.exe and click OK.
- Click Adjacent, select a restore point from the engagement you know everything works and finish the wizard. Your computer should now be back to what it was before the error.
Installing the driver manually
If you don't have a system restore point or prefer to avoid this method, yous can always endeavor installing the LAN controller drivers manually. Before you beginning, download the drivers for the born network adapter from your laptop/motherboard manufacturer's website.
- Concur downwards the Windows cardinal and press R. Type devmgmt.msc and press OK.
- In the device list, expand the listing of network adapters and notice the PCIe GBE family unit controller from Realtek.
- Right-click and select Update Driver Software.
- Select manual mode, which allows you to choose your own drivers, and specifies the right driver previously downloaded.
- Allow it install, reboot the device at the finish, and everything should work fine.
Notation: If this doesn't piece of work, try removing the battery from the motherboard for a minute and then reinstalling it earlier updating the drivers. This will reset the BIOS and assist you if Windows is stuck with an old driver and permit you lot to install a new driver.
Getting a PCIe Network Adapter
If the in a higher place methods didn't work, it could mean that your network adapter is dead.
Unfortunately, the simply way to solve this problem is to buy a new bill of fare. Luckily, PCIe network adapters are very cheap these days. All yous have to do is find i that meets your needs in terms of speed and compatibility with your motherboard, and y'all're skillful to go, just it will require advanced skills to supervene upon the adapter, so you lot tin also go a USB wifi adapter and connect to your wireless network if your router supports it.
Ultimately, whether it's a software or hardware problem, the set up will either be complimentary or very cheap if you need to buy a new network adapter. Either manner, the above methods will help yous find the cause of your problem and fix it.
Uninstalling the problem driver
- Press Windows + R, blazon "devmgmt.msc" (without the quotes) and press Enter to open the Device Manager.
- Expand "Network Adapters" and correct-click "Realtek PCIe GBE Family unit Controller".
- Then select "Remove" and select "Yes" in the confirmation prompt.
- Now disconnect the Ethernet cable and plug it dorsum in and so that Windows automatically installs the drivers. It is also recommended that you reboot to save these changes.
- If y'all cannot remove the driver, disconnect and re-enable it.
- If you can't do any of the above, correct-click and select Properties.
- At present run into if yous tin can reboot the drivers.
- Reboot your computer to save your changes and see if you tin can restore the Realtek PCIe GBE Family unit Controller adapter that has driver problems.
Frequently Asked Questions
- Press the Windows + R keys when opening the Run window.
- Devmgmt type.
- The Device Manager window will open.
- Select the Network Adapters window, correct-click on the Realtek PCIe pick and select Remove Drivers.
The Realtek PCIe Gbe Family unit Controller is a driver that resides on your motherboard and is used to control your local surface area network hardware. It controls the wired network part of your calculator. It is a set of controller chips that connects your computer's PCI Limited (PCIe) motorbus to GBE (Giga Band Ethernet).
- Uninstall and download the latest network driver.
- Remove the Cisco VPN customer or any other unsupported VPN software.
- Remove the wireless profile.
- Follow the troubleshooting procedure.
- Reboot the router.
- Make sure the network is turned on.
- Reboot the network.
- Go to "Search", type "Device Manager" and open up "Device Manager".
- Discover your Realtek Ethernet driver, right-click on information technology, and select Uninstall.
- Wait for the wizard to uninstall your commuter.
- Reboot your computer.
Source: https://techquack.com/troubleshooting-the-realtek-pcie-gbe-family-controller-not-working/
0 Response to "Realtek Pcie Gbe Family Controller Cannot Connect to Internet"
Postar um comentário